Enforcer R.C. Boat Talk

An Open Forum for Enforcer RC Boat Owners and Fans

Max Hansen
  • Male
  • Copenhagen
  • Denmark
Share on Facebook Share on Facebook MySpace

Max Hansen's Friends

  • Adam
  • Brian brooks
  • C.B.
  • Gordon T Haley
  • Brian
  • Lukas McKee
  • Jeff Dannenbaum
  • Michael Winter
  • Jacob Franakrt
  • mark adams
  • Jamie Boggs
  • Mark Volz
  • Tom DeBiase
  • Tony Castronovo

Max Hansen's Groups

Max Hansen's Discussions

Stingray Hydro
1 Reply

Hi Guys.Does anybody know if Enforcer still produce and sell the Stingray Hydro.I already wrote to Enforcer but have not heard back.Best regardsMaxContinue

Started this discussion. Last reply by Bruce Olson Mar 12, 2014.

The video of the M5 kit
9 Replies

Hi all.Can anyone tell me where to find the complete video "how to mount the M5 kit"When I follow the link from Throttle Tv, it seems like only the first half of the video appears. The remaining…Continue

Started this discussion. Last reply by Max Hansen May 19, 2012.

Clutch will not engage at hi speed.
1 Reply

Hello boaters. I have just build a small boat with a WHH M5 and clutch. I was running the boat today. The engine runs smootly and the clutch as well. But when when the engine begins to take hi speed…Continue

Started this discussion. Last reply by Finn Nohr Jun 26, 2011.

Problem with Zenoah 260 (M5)
2 Replies

Hi boatersI have a Zenoah 260pum (M5) Lately all I do is to adjust on the carburator constant and can not really get it to take max rpm. If I get it up in rpm, it runs unstable and when I hold in…Continue

Started this discussion. Last reply by Max Hansen Aug 29, 2010.

Gifts Received


Max Hansen has not received any gifts yet

Give a Gift


Max Hansen's Page

Max Hansen's Photos

  • Add Photos
  • View All

Max Hansen's Videos

  • Add Videos
  • View All

Max Hansen's Blog

Video of The Sting Ray Boat

Hi members.

Does anyone have videos with the new showelhead boat - The Sting Ray

Best regards

Posted on October 13, 2010 at 12:42pm — 1 Comment

Comment Wall (8 comments)

At 5:10pm on March 2, 2010, Tom DeBiase said…
Hey Max welcome to the site. We need pictures & video if you have any.

At 8:35pm on March 12, 2010, mark adams said…

here is what i did for my setup
At 10:42pm on March 14, 2010, mark adams said…
just ran today boat ran perfect i think i need to break in the motor a little longer ran about a full tank not quite.my only problem was i was getting some water in the hull.so i silicone the transom..up a little i think this will sovle it.. the boat was a blast to drive waiting for this weekend for another run..
At 5:10pm on April 13, 2010, Finn Nohr said…
Tak tak Max.

Har du været ude med din Team Pro? Hvordan sejler den?

Mht til vandet i båden så skulle jeg også lige vende mig til det. Jeg lagde en siliconefuge rundt for at gøre den tæt - hvilket jeg har fortrudt meget bagefter. Det eneste som skal være HELT tæt er radioboxen. En god løsning er an autobailer som gør at man hurtigt kan tømme båden for vand. Jeg har ikke selv monteret den endnu - men det kommer.

Jeg testede minSilex med en ABC 2814/3 prop i søndags og fik båden op på 96,1km/t. Det var en fin dag ved vandet indtil det blev så meget ebbe at vandet forsvanndt hehe
At 5:08pm on April 14, 2010, Finn Nohr said…
he he nå ja - så må de lære dansk.

Udstødning - ja jeg har også udskiftet min til en ArrowShark SuperSilence (ca. 750 kroner) . Selv med WHH silencer er deres tunudstødning temmeligt højtråbende.

At 6:10pm on May 18, 2010, Jacob Franakrt said…
Thanks a lot the pictures are very helpful. From the looks of it you had to shorten your driveshaft and tube. Is this correct. Does the plastic liner stay in the tube and then grease the inside of the plastic liner? Also do you just twist the driveshaft into the SPD-III Drive or is there a trick in getting that in easily.

Thanks for the help.
At 7:31pm on September 29, 2014, lauryn wake said…

Hello dear,

How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site. Could you please get back to me on my email: lauryn.wake@gmail.com
for the full details.

Have a nice day,

Thanks God bless.
Miss. Lauryn Wake.

At 12:25pm on June 17, 2015, Brian brooks said…
Max what length square drive cable did you order? Im finding it difficult to get a proper length

You need to be a member of Enforcer R.C. Boat Talk to add comments!

Join Enforcer R.C. Boat Talk


© 2023   Created by Daniel Hofman.   Powered by

Badges  |  Report an Issue  |  Terms of Service