Enforcer R.C. Boat Talk

An Open Forum for Enforcer RC Boat Owners and Fans

A friend told me of a good tip regarding the SPDIII drive. When you install a new stuffing tube let it hang out of the transom a bit. Then put a couple o-rings on the stuffing tube between the bracket and body of the drive. The reason for doing this is to lesson the grease that flows out all over the transom and force it to the cartage to lubricate the bearings.

Views: 76


You need to be a member of Enforcer R.C. Boat Talk to add comments!

Join Enforcer R.C. Boat Talk

© 2023   Created by Daniel Hofman.   Powered by

Badges  |  Report an Issue  |  Terms of Service