Enforcer R.C. Boat Talk

An Open Forum for Enforcer RC Boat Owners and Fans

So with most of the parts assembled the radio tray is now looking like this (note the dual antennas for the Spektrum MR3000 receiver). Also note the inclusion of the WHobbies Power Rod switch. This cant go in many places as access to the switch needs to be easy, so this was the best place I could come up with as any lower would make access to difficult.

The lower part of the tray was then lined with some sponge cloth. Hopefully this will soak up any water that may get inside and keep it away from the electronics. Also visible in this pic it the kill wire for the Killer RC kill switch.

And this is what it all looks like when complete. I quite like the results...

Views: 54


You need to be a member of Enforcer R.C. Boat Talk to add comments!

Join Enforcer R.C. Boat Talk

© 2023   Created by Daniel Hofman.   Powered by

Badges  |  Report an Issue  |  Terms of Service