An Open Forum for Enforcer RC Boat Owners and Fans
i order jet ski aqua blast from warehouse . the boat is very fast he and the handling is awesome due to 2 rudder back of the boat.
i will try to switch from 2 blade to 3 blade prop the engine is m5s
Added by hussain a on August 30, 2010 at 2:40pm — No Comments
Added by Michael J allen on August 26, 2010 at 2:20pm — 1 Comment
Robert Duke has become our 100th member on our new forum and I want to thank everyone for doing such a stellar job with the responses and advice offered. I am starting to hear from new customers how much they like the fact that they can come to this forum and not get treated badly or talked down to, so that says it all. I have always believed that when it comes to information that can help another, it should be freely shared.
I wrote a saying many years ago that simply goes;
Added by Tony Castronovo on August 24, 2010 at 11:00am — 3 Comments
Hi, recently bought a Demon from Tony. Very excited. My wife thinks I am regressing, but thinks it a good thing.
Got to meet Tony and Pam in Lake Placid while diving in FL. Great people and really cool operation. Check it out if you are ever within a few hours, really worth the time. Actually saw the hull coming out of the mold.
Been running nitros for 20 yrs, now I want to try and run with the Big Dogs. The lake never drops below 57F (2 nukes) so winter is…Continue
Added by Dave Fanfarillo on August 23, 2010 at 11:03am — No Comments
I have a RCMK EVO that I want to try in my Magnum 57. Has anyone figured out how to use the same throttle cable setup they use on a Zenoah with the RCMK?
My servo for the existing Zenoah throttle cable is in the radio box on the left side of the boat. Any photos of how anyone rigged their RCMK throttle cable with the servo on the left side of the boat would be greatly appreciated.
Added by Tom Maguire on August 20, 2010 at 3:30pm — 7 Comments
I have a Magnum 57 with an M5 engine. This is my first gas boat and it is a gas!
I live on a large fresh water lake that typically has some light chop on it. In my last three outings I flipped the boat in a turn. When running wide open the prop and rudders are pretty much all that seems to be in the water.
I have not touched the trim tabs, they remain set the way they were received from WHH. Is some down trim tab adjustment indicated here, if so how…Continue
Added by Tom Maguire on August 20, 2010 at 3:30pm — 3 Comments
I want to show you guys a typical failure associated with running too little or the wrong pre-mix oil, and in this case the wrong oil. We highly recommend Amsoil brand pre-mix, but we also specify that the label reads "SABER 100-1". This oil was specifically designed for high revving two cycle engines and most important to be pre-mixed with gasoline.
I have heard time after time about Amsoil's "Dominator Blend" of oil and when it was put on the market i contacted…Continue
Added by Tony Castronovo on August 12, 2010 at 2:40pm — 3 Comments
© 2023 Created by Daniel Hofman. Powered by