Max Hansen's Page

Hey Max welcome to the site. We need pictures & video if you have any.

Tom

here is what i did for my setup

just ran today boat ran perfect i think i need to break in the motor a little longer ran about a full tank not quite.my only problem was i was getting some water in the hull.so i silicone the transom..up a little i think this will sovle it.. the boat was a blast to drive waiting for this weekend for another run..

Tak tak Max.

Har du været ude med din Team Pro? Hvordan sejler den?

Mht til vandet i båden så skulle jeg også lige vende mig til det. Jeg lagde en siliconefuge rundt for at gøre den tæt - hvilket jeg har fortrudt meget bagefter. Det eneste som skal være HELT tæt er radioboxen. En god løsning er an autobailer som gør at man hurtigt kan tømme båden for vand. Jeg har ikke selv monteret den endnu - men det kommer.

Jeg testede minSilex med en ABC 2814/3 prop i søndags og fik båden op på 96,1km/t. Det var en fin dag ved vandet indtil det blev så meget ebbe at vandet forsvanndt hehe

he he nå ja - så må de lære dansk.

Udstødning - ja jeg har også udskiftet min til en ArrowShark SuperSilence (ca. 750 kroner) . Selv med WHH silencer er deres tunudstødning temmeligt højtråbende.

Hilsen
Finn

Max,
Thanks a lot the pictures are very helpful. From the looks of it you had to shorten your driveshaft and tube. Is this correct. Does the plastic liner stay in the tube and then grease the inside of the plastic liner? Also do you just twist the driveshaft into the SPD-III Drive or is there a trick in getting that in easily.

Thanks for the help.
Jake

Hello dear,

How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site. Could you please get back to me on my email: lauryn.wake@gmail.com
for the full details.

Have a nice day,

Thanks God bless.
Miss. Lauryn Wake.

Max what length square drive cable did you order? Im finding it difficult to get a proper length